Nextron Estimating Pty Ltd has prepared takeoffs and estimates for apartment buildings, commercial buildings, community facilities and more, across many trades. Here is a selection of the work, described by project type. Client names, locations and prices are kept private.
Selected Projects
Each project below shows the scope we measured. The figures come from the takeoffs we prepared from the client's drawings.
Three-storey apartment building
Painting takeoff for a three-storey brick apartment building, split by floor.
- Walls: about 1,407 m2 across three floors
- Ceilings: about 490 m2
- Skirtings: about 488 m
- 38 doors, plus about 359 m2 of exterior paint
Institutional facility expansion
Painting takeoff for an expansion made up of four separate buildings.
- Wall painting: more than 9,000 m2 across the four buildings
- Ceiling painting: more than 3,000 m2
- Floor coatings and door painting by building
- Takeoff set out building by building
Supported accommodation
Interior and exterior painting takeoff for a supported accommodation building.
- Interior walls: about 2,230 m2, with ceilings about 920 m2
- External items: rendered walls, columns, soffits and sunshades
- Fences, gates and privacy screens
- Doors counted by size
Community centre
Epoxy floor coating takeoff across basement, ground floor and roof plant areas.
- About 1,116 m2 of epoxy coating
- Listed by room: plant, loading bay, bin stores, car park entry
- Basement levels, ground floor and plant roof
Commercial building
Electrical takeoff of fittings, listed by type and count.
- 646 downlights across three types
- 558 socket outlets
- Light switches, isolators and circuit breakers
- About 80 line items in total
Multi-level residential building
Whole-building takeoff for a two-storey residential building.
- More than 140 line items
- External works, superstructure, openings and finishes
- Joinery, plumbing fixtures and electrical allowances
- 50 doors and 43 windows counted by size
Building with basement
Substructure takeoff for a multi-level building with a basement.
- About 1,168 m3 of excavation
- Bored piers, shotcrete wall, capping beam and footings
- Slabs on ground, suspended slabs, ramp and stairs
Administration building
Joinery takeoff for benches, cupboards and shelving, room by room.
- 213 line items across 15 benches and shelving areas
- Benchtops, splashbacks, cabinets, shelves and edging listed by type
- Handles, locks and shelf supports counted
Multi-level building
Plasterboard takeoff for walls and ceilings, by wall type.
- More than 7,600 m2 of plasterboard
- Wall linings by wall type, ceilings and bulkheads
- Jointing compound, tape and screws
Roofing project
Roofing takeoff for tiled and sheet roof areas.
- About 1,021 m2 of roof area, with insulation, sarking and plywood
- Fascia, soffits, ridge, hip and valley flashings
- About 161 m of gutters and 20 downpipes
About These Examples
We prepared each takeoff from the drawings and information the client supplied. We do not provide design, engineering or approvals. Project names, addresses and prices are not shown.
Frequently Asked Questions
Why are there no client names?
We keep client and project details private. We describe the work by project type and show the scope we measured. The figures come from the takeoffs we prepared, with names, addresses and all prices removed.
Can I see an example of your work?
Yes. See our sample quantity takeoffs, which show extracts from past takeoffs across ten trades.
Do you only work on these project types?
No. These are examples. We estimate residential, commercial and civil projects, and single trades. See all of our estimating services.
Where are your clients?
We work with clients across Australia by email and phone. Recent work has covered projects in Queensland, New South Wales, Victoria, South Australia, Western Australia, Tasmania and the Northern Territory.
Send us your project
Send your plans for a free quote. Email info@nextronestimating.com.au or call +61 468 251 702, or use the estimate request form.
Request an estimate